Location: /Trenches
Command Bunker Trench

Command Bunker Trench


Product Code: TRENCH/CB
 

Price: 10.00


Quantity: Add to Basket

Product Information

Dimensions

This trench bunker model is comprised of three resin models, the weapon pit model available on this website, the trench dug-out roof model and a concrete style roof support model, to give a firing gap over the top of the sandbags.

The trench command bunker, trench dug-out or fall-out shelter model is approximately 170mm wide by 67mm high (average) by 165mm front to back, including scenery embankment. The internal dimensions of the trench are approx 32mm deep and 100mm wide on average, and will provide sufficient cover for most 25mm to 28mm wargames figures. The normal height to underside of roof is 42mm approx to give a firing gap of about 10mm.

The resin roof model is included and is designed to fit over the trench weapon position to form a dug-out or bunker. The textured roof terrain model is approximately 120mm wide by 14mm thick by 120mm front to back. 

The lid is included and the command bunker could be used as a fallout shelter or trench dug-out. Dug-outs were used in WW1 to provide additional cover for resting troops and for extra protection during bombardment. They were generally roofed over with corrugated iron sheets or brushwood and then covered with at least 9" (225mm) of earth. To support the roof there is a concrete style support structure, made form resin approx 42mm high. This is required where you want a gap for firing from, between the top of the sandbags and the underside of the roof. The height of this model can be increased to approx 50mm to allow for figures with swords (eg leader figures in 40k).Please specify if you want this extra height at the time of ordering.

This model fits in with our trench system range. Buy individual trench pieces or check out our discounted COMBI-DEAL for a 4ft length of trench.

The trench system is also suitable for 'near future' wargame scenarios as well as Warhammer 40k wargame terrain.

This terrain model is also suitable for 1/48 scale model dioramas.

Background

Forget leaning a few doors against the strongest wall of your house and covering them with the heaviest of your belongings. If you really want to ‘Protect and Survive’ you need to be underground. The earth covering will protect you from the heat and blast of a nuclear detonation (providing its at least 10km away) and will shelter you from the subsequent radioactive fallout (provided you close the end of the shelter off and don’t go outside). The covering is earth and the shelter is also fire-proof so shouldn’t burn during the conflagration. 

The corrugated tin roof is strong enough to take a maximum of 9” of earth and will keep you dry. This shelter is large enough for your family or friends and can be sub-divided off with curtains to form a separate area for the toilet. 

In the post-apocalyptic world, the shelter can form a base of operations (mostly survival), an underground hospital or just basically a hovel. As a hideout for your gang it would provide cover from assault and be camouflaged so that it is concealed.

 

During WW2 a network of trenches and ringstands could form a complex and effective defensive line. Urban Construct have put together a selection of wargames terrain trench sections, which begin to illustrate the complexity and variety of fortifications scenery. Trenches were used as firing positions or to connect between shelters, gun-emplacements, tobruks and observation posts within a strong point. These wargames terrain models are based on research into real and sometimes still existing installations.

During WW1 several trenches were run in parallel, from the frontline trench to the support trench and behind that the reserve trench. Urban Construct produce wargames terrain trench sections, which are modular and will fit together so that you can form this type of WW1 scenery.  Communication trenches ran at approximately right angles to these trenches to connect up the whole system. Dug-outs branched out from these trenches and were used in WW1 to provide additional cover for resting troops and for extra protection during bombardment. They were generally roofed over with corrugated iron sheets or brushwood and then covered with at least 9" (225mm) of earth.

Figures, gun, additional 90o bend model and camouflage net are for display purposes only and are not included.The 'grass' texture has been added by mixing flock with PVA and a little water and pasted in clumps. It is not an original feature of the model which has a smooth finish so that you can add your own flock or sand textures to suit the environment you want your battles in.

 
 If you need help finding the right product or can't find the item you're looking for feel free to contact us...



© Copyright 2010. Urban Construct. All Rights Reserved.

Lee Marsh Design | Self Maintained Websites | Website Design Chesterfield